Teflon Threaded Injection Quill

teflon injection quill

Teflon injector is designed for the injection of concentrated acid. Excellent choice for injection of concentrated sulfuric acid.
Constructed from 100% virgin Teflon material.
Allows for injection of concentrated acids and directs flow away from pipe walls and threaded injection port and into the turbulent flow stream for maximum chemical diffusion.
Able to withstand the heat of dilution of concentrated acids into water.
Designed for flow rates up to 15 gal/hr [56 Liters/hr].
Works with pipes up to 12" [300 mm] in diameter.

For additional information view our Selection Guide.

ptfe injector

Download Data Sheet for Teflon Injector (30 kb)

PVC, CPVC & Kynar Injection Quills Metal Injection Quills Multi-Orifice Injection Quills Teflon Injection Quills

Multi-Orifice Threaded Diffusers

Multi-Orifice Threaded Injection Quills are excellent for even chemical dispersion across an entire pipe diameter. Quills are available in all materials.

sparger multi hole diffuser

Typical Uses:

Injecting chemicals into a liquid flow stream.

Dispersing gases such as CO2, Ozone, or Air into a liquid flow stream (gas/liquid diffusion).

For sizing recommendations on the orifice holes, contact Inyo Process. Alternatively you can use an on-line orifice calculator and determine the flow rate through a single orifice hole and then multiply times the number of diffuser holes.

For additional information on quill selection view our Selection Guide.

Multi-Orifice diffusers are available in two configurations QX & QXM:

QX style - A male/female npt fitting with a female npt for the chemical connection that allows for easy connection to a pipe or threaded npt tube fitting.

Download QX Multi-orifice Diffuser Data Sheet (37 kb)

QXM style - A dual Male npt end which allows for easy connection of a check valve or coupling or shut-off valve.

Download QXM Multi-orifice Diffuser Data Sheet (35 kb)

PVC, CPVC & Kynar Injection Quills Metal Injection Quills Multi-Orifice Injection Quills Teflon Injection Quills

Metal Injection Quills

Injection Quills are available in a range of materials including:

316L Stainless Steel
Hastelloy C-276
Titanium
Alloy 20

Metal Injection Quills provide an excellent choice for durability & strength

Metal injection quills are particular useful for longer injection quills over 6 inches.

When injecting chemicals such as sodium hypochlorite & acids, care must be taken in the choice of compatible material.

For additional information view our

Selection Guide

Metal Injection Quills are available in two configurations: QM & QMM

QM style - A male/female npt fitting with a female npt for the chemical connection that allows for easy connection to a pipe or threaded npt tube fitting.